Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: Sequoia Doc ID: RM000003GPX000X
Title: LIGHTING (EXT): SIDE TURN SIGNAL LIGHT ASSEMBLY: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for both the RH and LH sides.
  • The procedure described below is for the LH side.

1. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY

(a) Push the upper part of the mirror surface and tilt it.

(b) Apply protective tape, as shown in the illustration.

(c) Using a moulding remover, push the bottom of the glass upwards as shown in the illustration. Slide the glass upwards to detach the 4 claws, and remove the outer rear view mirror glass.

(d) Disconnect the connectors.